Emergency Response

Oil Spill Response

Detect, characterize, monitor and simulate oil spill drifts with CLS GROUP range of deployable satellite-trackers & drift model.

MOVE SPILLTRACK is a web-based tool which helps managing contingency supporting CLS Oil spill services
It has been used successfully in offshore operation since 2009. Particularly in high sensitive areas, the system helps to manage and control the contingency actions in order to avoid impacts in coastal and offshore sensitive areas.

Oil spill response service combines the following aspects:

  • Surveillance of oil spills by satellite radar images
  • Use of operational current forecasting system
  • Use of OSCAR drift model and simulation tool for calculating the dispersion of oil in the ocean.
  • SAR images programming and analyses
  • 24/7 dedicated team to provided support in case of accidents
  • Pack of drifting buoys to be deployed in case of spill
  • Web Interface with several visualization tools (integrating weather, current, Oil spill modelling, buoys trajectories, Satellite Images…)

Search & Rescue

Be prepared for an emergency situation with CLS GROUP and its web-based services for regular or emergency procedures.
MOVE Prosar helps coordinate first response for any emergency at sea (man overboard, container overboard, helicopter crash …).

The system is modular, integrating all metocean data, vessel traffic information, Search and Rescue procedures, regular discharges forecast and drift models.

CLS GROUP Search and rescue solutions details:

  • Fully compliant with IMO international standards
  • Allows 4 search mesh patterns based on IAMSAR MANUAL (1998) parameter to generate meshes
  • Configuration of the characteristics of the unit to be rescued
  • Sector search generated according to the type of vessel/aircraft and metocean conditions
  • Creating SAR report for pilots and to coordinate operations.
  • Allow to run simulations for HSE exercises offshore

BIO FOAM

Multi-expansion, fluorine free synthetic foam concentrate effective on hydrocarbon fires

EFFECTIVENESS ON HYDROCARBON FIRES

BIO FOAM foam concentrates have been designed to generate High expansion firefighting foam and to put out hydrocarbon fires. Depending on the equipment used BIO FOAM can also generate Low and Medium expansion firefighting foam. They are recommended for use where large volumes of finished foam are required, such as aircraft hangers, ships holds, car parks etc.

ENVIRONMENT

The BIOex R&D department has designed BIO FOAM firefighting foam concentrates with the intention of being totally fluorine derivative free. BIO FOAM is biodegradable. It deteriorates quickly without any PBT residues (Persistent Bioaccumulative Toxins).

Depending on the type of sewage treatment station you use and the arrangements for its use, BIO FOAM foaming agents can be flushed away and do not require incineration.

EXTINGUISHING PERFORMANCES

Uses:

  • Effective with Low, Medium and High Expansion
  • Applicable on hydrocarbon fires such as fuel, diesel oil, petrol, kerosene, etc.
  • Compatible with all dosage systems (contains corrosion inhibitors)
  • Can be used in mobile and fixed fire fighting systems (foam box, High Expansion generators, fire hose stations, etc.)
  • Feature:
    • Freeze protection up to -15°C available.

Certificates & Compliances:

  • European standards: EN 1568-2
  • Marine: VERITAS

Warranty:

  • 10 years

PRODUCT LINE

Click here to download the range brochure.

Perfectly suited to putting out fuel fires. Ideal for flooding large volumetric spaces with finished foam. BIO FOAM is available in 2 versions depending on the required anti-freeze protection.

BIO FOAM 5

Usable at concentrations from 2%

Click here to download Technical Sheet.

BIO FOAM 15

Usable at concentrations from 2%. Freeze protection up to -15°C

Click here to download Technical Sheet.

BIO FOR

Fluorine free wetting and foaming agent effective on solid fires

EFFECTIVENESS ON FIRES

100% of the BIO FOR formula is easily biodegradable.

It is the ecological solution to putting out solid fires (class A) thanks to its wetting and foaming properties. BIO FOR line additives provide optimum effectiveness when putting out solid fires: forest fires, urban fires, industrial fires, etc.

  • Wetting properties: Thanks to its affinity for solids, BIO FOR wetting and foaming agent penetrates embers deeply and puts them out. This specificity increases the extinguishing properties of the BIO FOR additive and prevents the fire from restarting.
  • Foaming properties: BIO FOR can be applied as a protective fire barrier. Indeed, the adhesive nature of this fire-fighting foam makes it possible for it to adhere to vertical surfaces for an extended period.

The application of a wide strip of BIO FOR during a forest fire for example, makes the vegetation fire proof and stops the progression of the fire.
BIO FOR additives are also effective on hydrocarbon fires such as burning vehicles…

ENVIRONMENT

BIO FOR foam is the ecological solution to solid fires (Class A), because it contains no fluorine derivatives or PBTs(Persistent Bioaccumulative Toxins).

It is easy to dispose of BIO FOR because it is biodegradable.

BIO FOR is also compliant with the European ground water directive: it contains no halogen derivatives.

Over 90% of fire service interventions are for this type of fire. Fire brigades therefore have a direct interest in its ecological and biodegradable properties.

EXTINGUISHING PERFORMANCES

Uses:

  • Effective at Low, Medium and High Expansion
  • Compatible with all dosage systems (contains corrosion inhibitors)
  • Applicable on class A fires:
  • Forest fires: brush, trees…
  • Urban fires: apartments, houses, farms, warehouses, vehicles…
  • Industrial fires: landfills, textiles, plastics, tyres…
  • Applicable on hydrocarbon fires: vehicle fires…
  • Can be used in mobile and fixed fire fighting systems (foam box, Hight Expansion generators, fire hose stations, CAFS system, etc.).

CERTIFICATES & COMPLIANCES

  • European standards: EN 1568 1-2-3
  • Marine: VERITAS
  • Forest fire standards: CEREN Certificate, Draves test AATCC 17-2005
  • International standard: UL listed, NFPA 18

WARRANTY

  • 10 years

PRODUCT LINE

Perfectly suited to putting out class A fires (solids) and hydrocarbon fires.

The lower the concentration, the higher the autonomy. BIO FOR makes it possible to increase the autonomy of firefighting vehicles and use them more efficiently, reducing intervention times and making overhauling operations easier.

Click here to download the Range brochure.

BIO FOR C

Can be used from 0.1% (ultra concentrated) on class A and 0.3% on hydrocarbon fires.

Click here to download Technical Sheet.

BIO FOR N

Can be used from 0.2% (very concentrated) on class A and 0.5% on hydrocarbon fires.

Click here to download Technical Sheet.

BIO FOR S

Can be used from 0.5% (concentrated) on class A and 3% on hydrocarbon fires.

Click here to download Technical Sheet.

BIO T

FLUORINE FREE biodegradable training foam concentrate for use on hydrocarbon fires

USE

The BIOex research and development team has designed a true ecological and economical alternative for quality training.

BIO T training foam concentrates generate a light foam allowing the fast re-ignition of the fuel layer used for training purposes.
This has the advantage of giving fire fighting teams the opportunity of training using a single training system. The rotation of teams training on this system also makes it possible for trainees to see how to apply additives and then handle them, thus giving a certain objectivity to handling fire-fighting foam concentrates in live conditions.

The extinguishing properties of the BIO T foam base have been deliberately reduced. Thus teams can train to improve their fire extinguishing techniques by perfecting how they apply them.

Once the training session is over, the BIO T foam is easy to clean due to its rapid settling.

ENVIRONMENT

BIO T line products are totally free of fluorine derivatives. 

They are easy to eliminate because these foam concentrates are biodegradable. They deteriorate quickly without any PBT residues (Persistent Bioaccumulative Toxin).

Depending on the capacity of your sewage treatment station and your waste contract, BIO T training foam concentrates can be eliminated without using incineration..

EXTINGUISHING PERFORMANCES

Uses:

  • Usable at Low, Medium and High Expansion
  • Applicable on hydrocarbon fires such as fuel, diesel oil, petrol, kerosene, etc.
  • Used for all types of manoeuvres
  • Compatible with all equipment on the market, under identical conditions to a classic operational foam concentrate.
  • FEATURES: Usable at 1%, 3% and 6%.

PRODUCT LINE

The BIO T foam concentrate line is ideal for training and learning how to handle operational foam concentrates. These training additives are perfectly suitable for emergency fire team training.

BIO T is available in several concentrations making it possible to better adapt to existing fire extinguishing systems.

BIO T3

Usable at concentrations of 3%.

BIO T6

Usable at concentrations of 6%.

BIOFILM

Fluorosynthetic AFFF foam concentrate effective on hydrocarbon fires

EFFECTIVENESS ON FIRES

The BIOFILM line fire-fighting foam concentrates are fluorosynthetic AFFF foam concentrates exclusively formulated using a surfactant foam base designed to put out hydrocarbon fires.
The so-called AFFF film generating property (Aqueous Film Forming Foam) gives BIOFILM an excellent extinguishing speed on hydrocarbon fires using direct application. The foam is applied directly on the surface of the burning hydrocarbon using a fire monitor or hose in the solid jet position making it possible to fight the fire from a distance.

ENVIRONMENT

The raw materials selected by BIOex in the design and development of the product have a minimum impact on the environment.

EXTINGUISHING PERFORMANCE

Uses:

  • Effective in Low and Medium expansion
  • Can be used in mobile and fixed fire fighting systems (bladder tanks, Sprinklers, fire hose stations, etc.)
  • Compatible with all equipment available on the market and with all dosage systems (contains corrosion inhibitors)
  • Applicable on hydrocarbon fires such as fuel, diesel oil, petrol, kerosene, etc.
  • Features:
    • Usable at 1%, 3% or 6%.
    •  Concentrations of 1% and 3% significantly reduce storage volumes and the directly related costs, while increasing the autonomy of use of the fire-fighting foam concentrate.
    • Use from 6% corresponds to the common concentration in most extinguisher systems.
    • Freeze protection up to -15°C available.

Certificates & Compliances

  • European standards: EN 1568 3
  • Marine: VERITAS
  • Aviation: ICAO
  • Oil Industry: LASTFIRE & GESIP
  • International standards : UL 162

Warranty

  • 10 years

PRODUCT LINE

This line of AFFF fluorosynthetic foam concentrates, which is perfectly suited to putting out hydrocarbon fires, is available in several concentrations.

The wide selection of available BIOFILM concentrations makes it possible for us to meet the varying needs of our customers, who are themselves under the constraints imposed by their existing automatic or semi-automatic fire extinguishing systems.

Furthermore, a low concentration makes it possible to increase the autonomy of the fire fighting teams, or to reduce storage volumes.

Use from 6% corresponds to the common concentration in most extinguisher systems. Concentrations of 1% and 3% significantly reduce storage volumes and the directly related costs, while increasing the autonomy of use of the fire-fighting foam concentrate by the fire brigade to put out different types of fire.

BIOex has also created freeze-proof fire-fighting foam concentrate versions. This specificity is a significant advantage when storing them for use in temperatures below 0°C.

Click here to download the Range Brochure.

BIOFILM 1

Usable at concentrations of 1%.

Click here to download Technical Sheet.

BIOFILM 1 LT15

Usable at concentrations of 1%. Freeze protection up to 15%.

Click here to download Technical Sheet.

BIOFILM3s

Usable at concentrations of 3%.

Click here to download Technical Sheet.

BIOFILM 3S UL LISTED

Usable at concentrations of 3%.

Click here to download Technical Sheet.

BIOFILM 3S LT 15

Usable at concentrations of 3%. Freeze protection up to -15°C.

Click here to download Technical Sheet.

BIOFILM 6S

Usable at concentrations of 6%.

Click here to download Technical Sheet.

BIOFILM 6S LT15

Usable at concentrations of 6%. Freeze protection up to -15°C

Click here to download Technical Sheet.

D FOAM

Silicone free anti-foaming agent to abate firefighting foam that has been applied

EFFECTIVENESS

D-FOAM has been especially designed as an anti-foaming agent to abate fire-fighting foams. After Low, Medium or High expansion tests, or after a training exercise, or after the accidental triggering of a fire extinguisher system, D-FOAM is perfectly suited to the abatement of fire-fighting foams. Thanks to this agent, the area invaded by foam can be cleaned quickly and returned to its previous state.

D-FOAM has a durable effect, even when the environment is subjected to powerful mechanical forces. Thus the foaming power is eliminated and the solution with a concentration of surfactants stops generating foam. This property is especially necessary in the event of accidental spillages; excess foam can overflow and disrupt the operation of sewage treatment stations.

ENVIRONMENT

D-FOAM is a silicone free product, it is chemically inert and does not alter the treated liquid. It is perfectly suited to the operation of a sewage treatment plant.

PERFORMANCES

Uses:

  • Applicable on existing foam
  • Applicable directly into the foaming solution to prevent discharges from foaming
  • Can be used with a high pressure appliance, hoses in the spraying position, PROPAK…

Warranty:

  • 1 year

PRODUCT LINE

Click here to download the Range brochure.

D-FOAM

Anti-foaming agent

Click here to download Technical Sheet.

ECOPOL

Multi-risk, fluorine free ecological foam concentrate effective on all types of fire – High Expansion foam

EFFECTIVENESS ON FIRES

ECOPOL is the first fluorine free fire fighting foam concentrate in the world!

This ecological foam concentrate formulated using a 100% natural surfactant base can be used to put out all types of class A and B fires. Designed in 2002 thanks to major research and development work, its multi-application versatility does not prevent the high effectiveness of its extinguishing capability.

ECOPOL, a versatile, synthetic AR foam concentrate completely fluorine derivative free, effectively replaces the use of AFFF (Aqueous Film Forming Foam) foam concentrates which are harmful to the environment by combining THE RESPECT FOR THE ENVIRONMENT WITH HIGH PERFORMANCES ON ALL TYPES OF CLASS A AND B FIRES.

ECOPOL has diverse extinguishing properties which make it a reference on the market because of its Alcohol Resistant specificity and its foaming and wetting properties.

Effective on hydrocarbon and polar solvent fires!

The versatile AR (Alcohol Resistant) property consists in generating a protective gel film at the surface of all types of inflammable polar liquids.

The effectiveness of ECOPOL on a hydrocarbonfirecan be compared to an AFFF foam concentrate (Aqueous Film Forming Foam): the application of the fire fighting foam must be gentle, i.e. applied indirectly to the burning product using a vertical adjacent surface to let it run onto the surface of the burning product. This type of application corresponds to most live fire fighting interventions. An application using Medium expansion is also possible to spread the foam evenly and without contamination.
This fluorine free film, specific to the ECOPOL foam concentrate,also provides an exceptional resistance to re-ignition.

Applicable on toxic vapour!

The mechanically insulating property of the foam generated using ECOPOL is especially effective, and can also be used to contain the toxic vapours of certain solvents that react to water.

High foaming capability!

The adhesive nature of the foam generated makes it possible for it to adhere to vertical surfaces for an extended period. ECOPOL can be applied as a protective fire barrier. This adhesive fire-fighting foam can be used to durably cool vertical structures, such as plane fuselages. The application of a wide strip of ECOPOL during a forest fire for example, makes the vegetation fire proof and stops the progression of the fire.

ECOPOL also generates an exceptional High expansion foam. It is therefore recommended to drown large volumes, such as hangars, warehouses, ship’s holds, car parks, etc.

Effective on class A fires!

Its affinity for solid supports, combined with its high wetting capability gives ECOPOL high extinguishing performances on all class A fires.

ENVIRONMENT

The ECOPOL foam concentrate is formulated using a natural and renewable resource: copra fatty acids (coconut) 100% NATURAL origin.

Depending on the capacity of your sewage treatment station and your waste contract, ECOPOL foam can be eliminated without using incineration.

ECOPOL is classified easily biodegradable. It deteriorates quickly without any PBT residues (Persistent Bioaccumulative Toxins).

ECOPOL is also compliant with the European ground water directive: it contains no halogen derivatives.

The ECOPOL ecological foam concentrate is the alternative to combine the respect of the environment with high extinguishing properties on all types of fire.

In 2002, convinced of the harmfulness of all fluorine derivatives, BIOex was already committed to protect our environment and launched ECOPOL, THE first fluorine free foam concentrate!

It has been tested and approved by our customers all over the world.

ECOPOL, a versatile AR foam concentrate, has the advantage of being totally fluorine derivative free. Opposed to AFFF foam concentrates that contain fluorine compound surfactants (PFT) and perfluorinated compounds (PFC) that cause significant contamination of the natural environment on a global scale, creating the current preoccupying levels of concentration.

In fact, fluorine compounds have been recognised by several specialists to be potentially Persistent in the environment, Bioaccumulative and Toxic for living organisms.

The use of the ECOPOL ecological foam concentrate is the alternative to combine the respect of the environment with high extinguishing properties on all types of fire.

EXTINGUISHING PERFORMANCES

Uses:

  • Effective at Low, Medium and High Expansion
  • Effective on class A fires:
  • Forest fires: brush, trees…
  • Urban fires: apartments, houses, farms, warehouses, vehicles…
  • Industrial fires: landfills, textiles, plastics, tyres…Applicable on hydrocarbon fires such as fuel, diesel oil, petrol, kerosene, etc.
  • Applicable on polar solvent fires such as alcohol, ketones, ethers, etc.
  • Applicable to retain the release of gases: acids HCl, NH3 … used with Medium expansion.
  • Compatible with all dosage systems (contains corrosion inhibitors)
  • Can be used in mobile and fixed fire fighting systems (foam box, High Expansion generators, fire hose stations, CAFS systems, etc.)

Certificates & Compliances:

  • European standards: EN 1568 1-2-3-4
  • Oil industry: GESIP – LASTFIRE
  • Marine: VERITAS
  • High expansion: APSAD R12
  • Aviation: ICAO level B
  • Class A: CEREN Certificate, Draves test AATCC 17-2005

PRODUCT LINE

ECOPOL foam concentrate is your high performance ecological solution for all types of fire: Class A and B.

ECOPOL is available in several concentrations to better meet the needs of the different existing automatic and semi-automatic extinguishing systems. At low concentrations it is possible to increase the autonomy of fire fighting teams, or to reduce the storage volume and thus reduce its purchase cost.

Click here to download Range Brochure.

ECOPOL

Can be used starting from 0.3% on class A fires. Can be used at 3% on hydrocarbon and polar solvent fires.

Click here to download Technical Sheet.

ECOPOL 3×6

Can be used at 3% on hydrocarbon fires and 6% on polar solvent fires.

Click here to download Technical Sheet.

ECOPOL 6

Can be used at 6% on hydrocarbon and polar solvent fires.

Click here to download Technical Sheet.

ECOPOL F3 HC

Fluorine free ecological foam concentrate Specially for Hydrocarbon Risk

Multi-expansion, fluorine free synthetic foam concentrate effective on hydrocarbon fires

EFFECTIVENESS ON FIRES

Effective on hydrocarbon fires

THE first fluorine-free 3% foam concentrate for hydrocarbon fires that performs better than the best AFFFs.

  • 2002: At BIOex we were convinced of the harmfulness of fluorine derivatives and were already working to preserve our environment by launching ECOPOL, the first fluorine-free multi-purpose foam concentrate.
  • 2015: We launch the new formula ECOPOL F3 HC specially developed to create the first fluorine-free 3% foam concentrate with an exceptionally fast extinguishing action on hydrocarbon fires.

1A-certified extinguishing performance according to EN 1568-3 standard

  • Can be used at 3% in direct application on hydrocarbon fires.
  • Certified by an independent recognized laboratory, ECOPOL F3 HC has obtained the best 1A performance classification under EN 1568-3 standard.

Powerful foaming capability!

The adhesive nature of the foam generated, combined with its slow drainage, offers durable adherence on vertical surfaces.

It is used as a protective fire barrier for long-lasting cooling of storage containers or hydrocarbon tanks.

The foam concentrate for hydrocarbon fires thanks to:

  • Excellent smothering properties equal to the best AFFF foams.
  • Very long burn back time equal to the best protein foams
  • Its performances: 1A/Fresh water and 1A/Sea water
  • Low environmental impact

ENVIRONMENT

As a totally fluorine-free foam concentrate, ECOPOL F3 HC is not subject to current or forthcoming regulatory controls on products containing fluorine derivatives.

ECOPOL F3 HC is completely free of fluorine derivatives (PFCs, PerFluorinated Compounds) recognized as Persistent in the environment, Bioaccumulable and Toxic to living organisms.

ECOPOL F3 HC is classified as readily biodegradable. It breaks down rapidly with no PBT (Persistent Bioaccumulable Toxic) residueand contains no halogen derivatives.

The use of ECOPOL F3 HC is the alternative for combining respect for the environment with highly effective fire extinguishing capability.

Depending on the absorption capacity of your sewage treatment plant and your spillage agreement, ECOPOL F3 HC foam can be eliminated without resorting to incineration.

EXTINGUISHING PERFORMANCES

Uses:

  • Effective at Low Expansion
  • Can be used on hydrocarbon fires as fuel oil, diesel, petrol, kerosene, etc.
  • Compatible with most dosing systems
  • Usable in mobile and fixed fire extinguishing resources

Certificates & Compliances:

  • European standards 1A fresh water & 1A sea water : EN 1568-3
  • Marine: VERITAS

Waranty:

  • 10 years

PRODUCT LINE

Click here to download Range Brochure.

ECOPOL F3 HC

Can be used at 3% on hydrocarbon fires.6% version available on request.

Click here to download the Technical Sheet.

ECOPOL PREMIUM

Polyvalent multi-risk fluorine-free foam concentrate

EFFECTIVENESS ON FIRES

A FLUORINE FREE foam concentrate as efficient as the best AFFF-ARs !

  • 2002: At BIOex we were convinced of the harmfulness of fluorine derivatives and were already working to preserve our environment by launching ECOPOL, the first fluorine-free multi-purpose foam concentrate.
  • 2017: BIOex launches the new formula ECOPOL PREMIUM to achieve the best performance classification:
    • On hydrocarbon fires: Certified 1A/1A – EN 1568-3
    • On polar solvent fires: Certified 1A/1A – EN 1568-4.

Greater efficiency on hydrocarbon and polar solvent fires !

The extinguishing effectiveness of ECOPOL PREMIUM on hydrocarbon fires can be compared to an AFFF foam concentrate (Aqueous Film Forming Foam) that contains fluorine.

The multi-purpose AR (Alcohol Resistant) foam concentrate works by generating a protective gel film on the surface of all types of flammable polar solvent liquids.

ECOPOL PREMIUM provides exceptional resistance to burn back similar to fluoro protein foam concentrates.

A powerful expansion capability which increases the effectiveness!

The adhesive nature of the foam generated, combined with its slow drainage time, offers durable adherence on vertical surfaces.

ECOPOL PREMIUM is efficient on solid fires by its wetting and expansion properties.

AN EXCELLENT FOAM CONCENTRATE FOR USE ON HYDROCARBON AND POLAR SOLVENT FIRES:

  • Efficiency in direct application equal to that of AFFF
  • Exceptional quality of the protective gel film on polar solvents
  • Resistance to reignition as reliable as the best protein based foams
  • As efficient with fresh water as with sea water
  • 100% free of fluorine derivatives (without PFC, PFT, PFOA and PFOS)

ENVIRONMENT

As a totally fluorine-free foam concentrate, ECOPOL PREMIUM is not subject to current or forthcoming regulatory controls on the prohibition on products containing fluorine derivatives.

ECOPOL PREMIUM is completely free of fluorine derivatives (PFCs, PerFluorinated Compounds) recognized as persistent in the environment, that are detrimental as bioaccumulables and toxic to living organisms.

ECOPOL PREMIUM is classified as readily biodegradable. It breaks down rapidly with no PBT (Persistent Bioaccumulable Toxic) residue and contains no halogen derivatives.

The use of ECOPOL PREMIUM is the alternative for combining respect for the environment with a highly effective fire extinguishing capability.

Depending on the absorption capacity of your sewage treatment plant and your spillage arrangements, ECOPOL PREMIUM can be eliminated without resorting to incineration.

EXTINGUISHING PERFORMANCES

Uses:

  • Effective on industrial fires: landfills, plastics, tyres, etc.
  • Effective on hydrocarbon fires: fuel, diesel oil, petrol, kerosene, etc.
  • Effective on polar solvent fires: alcohols, ketones, ethers, etc.
  • Effective on urban fires: waste bins, furniture, textiles, etc.
  • Effective at Low, Medium and High Expansion.
  • Compatible with most dosing systems.
  • Can be used with mobile and fixed fire fighting systems.

Certificates & Compliances:

  • European standards:
  • EN 1568 – 1 : Conform
  • EN 1568 – 2 : Conform
  • EN 1568 – 3 : 1A / 1A
  • EN 1568 – 4 : 1A / 1A
  • Oil industry: LASTFIRE
  • Forest fire standards: CEREN Certificate
  • Certification in progress : UL 162 / GESIP

Warranty:

  • 10 years

PRODUCT LINE:

Click here to download Range Brochure.

FILMOPOL

AFFF fluorosynthetic AR versatile foam concentrate effective on hydrocarbon and polar solvent fires

EFFECTIVENESS ON FIRES

The fire-fighting foam concentrates in the FILMOPOL line have specificities that make it possible to effectively put out hydrocarbon and polar solvent fires:

  • The so-called AFFF film generating property (Aqueous Film Forming Foam)gives FILMOPOL agents an excellent fire extinguishing speed when directly applied to hydrocarbon fires, i.e. applied directly to the surface of the burning product using a fire hose or monitor in the solid jet position making it possible to fight the fire from a distance.
  • The versatile AR property (Alcohol Resistant) consists in generating a protective gel film on the surface of all types of flammable liquids (polar solvents). This film also provides excellent resistance to re-ignition.

ENVIRONMENT

The raw materials selected by BIOex in the design and development of the product have a minimum impact on the environment.

EXTINGUISHING PERFORMANCES

Uses:

  • Effective at Low, Medium and High expansion
  • Applicable on hydrocarbon fires such as fuel, diesel oil, petrol, kerosene, etc.
  • Applicable on polar solvent fires such as alcohol, ketones, ethers, etc.
  • Compatible with all equipment available on the market and with all dosage systems (contains corrosion inhibitors)
  • Can be used in mobile and fixed fire fighting systems (sprinklers, high expansion generators, fire hose stations, etc.)
  • Features :
    • Usable from 1% on hydrocarbon fires and from 3% on polar solvent fires.
    • Freeze protection up to -15°C available.

Certificates & Compliances:

  • European standards: EN 1568 1-2-3-4.
  • Marine: VERITAS.
  • Oil Industry pétrolières: GESIP – LASTFIRE.

Warranty:

  • 10 years

PRODUCT LINE

Foam perfectly suited to putting out fires in liquids that are miscible with water or not.

Available in several concentrations in order to be adapted to existing automatic and semi-automatic extinguishing systems.

A low concentration makes it possible to increase the autonomy of the fire fighting teams, or to reduce storage volumes.

Click here to download Range Brochure.

FILMOPOL 1×3 LT15

Usable at 1% on hydrocarbon fires and at 3% on polar solvent fires. Freeze protection up to -15°C.

Click here to download Technical Sheet.

FILMOPOL 3

Usable at concentrations of 3% on hydrocarbon and polar solvent fires.

Click here to download Technical Sheet.

FILMOPOL 3 UL LISTED

Usable at concentrations of 3% on hydrocarbon and polar solvent fires.

Click here to download Technical Sheet.

FILMOPOL 3LT 15

Usable at concentrations of 3% on hydrocarbon and polar solvent fires. Freeze protection up to -15°C.

Click here to download Technical Sheet.

FILMOPOL 3×6

Usable at 3% on hydrocarbon fires and 6% on polar solvent fires. Freeze protection up to -15°C.

Click here to download Technical Sheet.

FILMOPOL 3×6 LT15

Usable at 3% on hydrocarbon fires and 6% on polar solvent fires. Freeze protection up to -15°C.

Click here to download Technical Sheet.

FILMOPOL 6

Usable at concentrations of 6% on hydrocarbon and polar solvent fires.

Click here to download Technical Sheet.

FILMOPOL 6 LT15

Usable at concentrations of 6% on hydrocarbon and polar solvent fires. Freeze protection up to -15°C.

Click here to download Technical Sheet.

FLUOFOAM

Fluorosynthetic AFFF foam concentrate effective on hydrocarbon fires

EFFECTIVENESS ON FIRES

The additives in the FLUOFOAM line are specially designed to control hydrocarbon fires.

The so-called film generating property AFFF (Aqueous Film Forming Foam)gives the FLUOFOAM fire-fighting foam concentrates an excellent fire extinguishing speed on hydrocarbon fires. The action of the film applied to a burning liquid that is water-immiscible blocks access to oxygen, like a fire blanket, to end up smothering and putting out the fire.

The foam concentrate is applied directly, i.e. directly on the surface of the burning product using a hose or a monitor in the “solid jet” position. This setting makes it possible for the fire fighting team to fight the fire from a long distance and thus avoid exposure to unbearable heat sources.

ENVIRONMENT

The raw materials selected by BIOex in the design and development have a minimum impact on the environment.

EXTINGUISHING PERFORMANCES

Uses:

  • Effective in Low and Medium expansion
  • Can be used in mobile and fixed fire fighting systems (bladder tanks, sprinklers, fire hose stations, etc)
  • Compatible with all equipment available on the market and with all dosage systems (contains corrosion inhibitors)
  • Applicable on hydrocarbon fires such as fuel, diesel oil, petrol, kerosene, etc.
  • Features:
    • Usable at 1%, 3% and 6%.
    • A low concentration of the product makes it possible to increase the autonomy of the firefighting teams, or to reduce the storage volume for the foam concentrate, and therefore its directly related cost.
    • Freeze protection up to -15°C available.

Certificates & Compliances:

  • European standards: EN 1568 3
  • Marine : VERITAS

Warranty:

  • 10 years

PRODUCT LINE

The fire-fighting foam concentrates in the FLUOFOAM line are perfectly suited to putting out fires of liquids that are non miscible with water.

They are available is several concentrations to better adapt to the different existing automatic and semi-automatic extinguishing systems.

A low concentration of the product makes it possible to increase the autonomy of the fire fighting teams, or to reduce the storage volume for the foam concentrate, and therefore its directly related cost.

Click here to download Range Brochure.

FLUFOAM 1

Usable at 1%.

Click here download Technical Sheet.

FLUOFOAM 3

Usable at 3%.

Click here download Technical Sheet.

FLUOFOAM 3 LT 15

Usable at 3%. Freeze protection up to 15°C.

Click here download Technical Sheet.

FLUOFOAM 6

Usable at 6%

Click here download Technical Sheet.

FLUOPRO

Fluoroprotein foam concentrate effective on hydrocarbon fires

EFFECTIVENESS ON FIRES

FLUOPRO fire-fighting foam concentrates have been designed to generate a Low expansion fire fighting foam to put out hydrocarbon fires. These protein based additives resist re-ignition and insulate from heat.

For increased effectiveness we recommend using FLUOPRO foam concentrate indirectly on the burning liquid using an adjacent vertical surface. The fire-fighting foam will pour down its surface slowly and spread evenly on the burning surface. It is also possible to use it with Medium Expansion. We then refer to gentle application.

ENVIRONMENT

The raw materials selected by BIOex in the design and development of FLUOPRO foam concentrates have a minimum impact on the environment.

EXTINGUISHING PERFORMANCES

Uses:

  • Effective in Low expansion
  • Can be used in mobile and fixed fire fighting systems (bladder tanks, sprinklers, fire hose stations, etc.)
  • Compatible with all equipment available on the market and with all dosage systems (contains corrosion inhibitors)
  • Applicable on hydrocarbon fires such as fuel, diesel oil, petrol, kerosene, etc.
  • Feature:
    • Usable at 3% and 6%.

Warranty:

  • 5 years

PRODUCT LINE

The fire-fighting foam concentrates in the FLUOPRO line are perfectly suited to putting out fires of liquids that are non miscible with water.

BIOex proposes two concentrations of FLUOPRO in order to better adapt to existing automatic or semi-automatic extinguishing systems.

Click here to download Range Brochure.

FLUOPRO 3E

Usable at 3% on hydrocarbon fires.

Click here to download Technical Sheet.

FLUOPRO 6E

Usable at 6% on hydrocarbon fires.

Click here to download Technical Sheet.

HYDROPOL

Fluorosynthetic versatile AR foam concentrate effective on hydrocarbon and polar solvent fires

EFFECTIVENESS ON FIRES

HYDROPOL fire-fighting foam concentrates have been developed to control fire risks on liquids miscible with water or not. They are therefore effective on hydrocarbonand polar solvent fires.

Depending on the equipment used, HYDROPOL can be used to generate Low, Medium or High Expansion foam.

For better effectiveness we recommend the application of HYDROPOL fire-fighting foam concentrate indirectly on the burning liquid by using an adjacent vertical surface so that it pours down its surface. An application using Medium expansion is also possible to spread the foam evenly and without contamination. We then refer to agentle application.

HYDROPOL foam concentrate’s versatile AR property consists in forming a protective gel film on polar solvent type inflammable liquids to smother the fire as would a fire blanket.
This film also provides excellent resistance to re-ignition.

ENVIRONMENT

The selected raw materials have a minimum impact on the environment.

EXTINGUISHING PERFORMANCES

Uses:

  • Effective at Low, Medium and High expansion
  • Can be used in mobile and fixed fire fighting systems (sprinklers, high expansion generators, fire hose stations, etc.)
  • Compatible with all equipment available on the market and with all dosage systems (contains corrosion inhibitors)
  • Applicable on hydrocarbon fires such as fuel, diesel oil, petrol, kerosene, etc.
  • Applicable on polar solvent fires such as alcohol, ketones, ethers, etc.
  • Applicable to retain the release of gases: acids HCI, NH3….used with Medium expansion
  • Features:
    •  Usable at 3% and 6%. Al low concentrations it is posibble to increase the autonomy of firefighting teams, or to reduce the storage volume and thus reduce its purchase cost.

Certificates & Compliances:

  • European standards: EN 1568 1-2-3-4.
  • Marine : VERITAS & OMI Circ.670
  • Oil industry: GESIP.

Warranty:

  • 10 years

PRODUCT LINE

The HYDROPOL line of additives is perfectly suited to extinguish liquid hydrocarbon or polar solvent fires.

HYDROPOL is available in several concentrations to better meet the needs of the different existing automatic and semi-automatic extinguishing systems. At low concentrations it is possible to increase the autonomy of fire fighting teams, or to reduce the storage volume and thus reduce its purchase cost.

Click here to download Range Brochure.

HYDROPOL 3

Usable at concentrations of 3%.

Click here to download Technical Sheet.

HYDROPOL 6

Usable at concentrations of 6%.

Click here to download Technical Sheet.

NEUTRAL PLUS

Toxic vapour supressing agent

EFFECTIVENESS

NEUTRAL PLUS is specially designed to suppress toxic vapours.

Toxic vapours are characterised by the release into the atmosphere of gaseous substances. They can be of varying origins:

  • Pressurised gas: phosgene, ethylene oxide, vinyl chloride, ammonia or even chlorine, etc.
  • Decomposition by contact with water: TiCl4, POCl3, SOCl2…
  • Thermal reaction: silanes …
  • Concentrated solutions: hydrochloric acid, ammonia…

These solvents have a high destructive capability of fire-fighting foams.
In some cases, the application of conventional foams is strongly discouraged as the reaction can be violent.

Specially formulated, the foam produced using NEUTRAL PLUS makes it possible to create a sealed barrier to control the release of toxic gas. It must be continually renewed until the product has been collected.

Especially useful in unloading zones, NEUTRAL PLUS for example makes it possible to control a leak while waiting for the emergency services to get organised and for the substance to be pumped.

NEUTRAL PLUS is effective on (non exhaustive list):

Acids:

  • Acetic
  • Alkyl sulfonates
  • Hydrobromic
  • Hydrochloric
  • Hydrofluoric
  • Nitric
  • Phosphoric
  • Sulphuric

Alkalis:

  • Alkylamines
  • Ammonia (gas)
  • Ethylamine (1, di, tri)
  • Ethylene Diamine
  • Hydrazine
  • Methylamine (1, di, tri)
  • Potash
  • Pyridine
  • Soda

Reagents:

  • Bromine
  • Chlorine (gas)
  • Chlorosilanes
  • Chlorine Dioxide
  • Sulphur dichloride
  • Propylene oxide
  • Titanium tetrachloride
  • Toluene Diisocyanate
  • Phosphor trichloride

ENVIRONMENT

The selected raw materials have a minimum impact on the environment.

PERFORMANCES

Uses:

  • On non reactive products:
NEUTRAL PLUS must be applied using Medium expansion: anhydrous acids and water based solutions, alkalis, amines, ammonia…
The minimum recommended application is 10 l/m2.min.
The foam mat should be produced at a height of 50 cm and regularly renewed to maintain the mat until the leak is controlled and the spillage recovered.
  • On reactive products
NEUTRAL PLUS must be applied using medium expansion.
The minimum recommended application is 20 l/m2.min.
Once the vapours are under control, a coating of at least 50 centimetres must be maintained.
A case by case expertise is required to garantee the effectiveness of the product.

Certificates & Compliances:

  • Live miniature tests on customer sites.

Warranty:

  • 5 years

PRODUCT LINE

Click here to download Range Brochure.

NEUTRAL PLUS

Usable at concentrations of 6%.

Click here to download Technical Sheet.

POLYFILM

FFFP fluorosynthetic AR versatile foam concentrate effective on hydrocarbon and polar solvent fires

EFFECTIVENESS ON FIRES

The POLYFILM foam concentrates have specificities that make it possible to effectively put out hydrocarbon and polar solvent fires:

  • The so-called film generating property FFFP (Film Forming FluoroProtein)gives the POLYFILM foaming agent an excellent extinguishing speed on hydrocarbon fires using direct application, i.e. when directly applied to the surface of the burning liquid. A fire hose or monitor set to the “solid jet “position can be used for this application and will make it possible for the fire fighting team to fight the fire from a correct distance avoiding their exposure to intense heat.
  • The versatile AR (Alcohol Resistant) property consist in forming a protective coating film on the surface of all types of inflammable liquids (polar solvents) in order to smother the fire by depriving it of oxygen (the fire blanket principle).

This film also provides excellent resistance to re-ignition.

ENVIRONMENT

The raw materials selected by BIOex in the design and development of the fire fighting product have a minimum impact on the environment.

EXTINGUISHING PERFORMANCES

Uses:

  • Effective in Low and Medium expansion
  • Applicable on hydrocarbon fires such as fuel, diesel oil, petrol, kerosene, etc
  • Applicable on polar solvent fires such as alcohol, ketones, ethers, etc.
  • Compatible with all equipment available on the market and with all dosage systems (contains corrosion inhibitors)
  • Can be used in mobile and fixed fire fighting systems (sprinklers, high expansion generators, fire hose stations, etc.)
  • Feature:
    • Effective at 3% on hydrocarbon fires and at 6% on polar solvent fires.

Certificates & Compliances:

  • European standards: EN 1568 3-4
  • Marine: VERITAS
  • Oil Industry: GESIP

Warranty:

  • 5 years

PRODUCT LINE

Perfectly suited to putting out fires of liquids that are miscible with water or not.

Click here to download Range Brochure.

POLYFILM 9

Usable at 3% on hydrocarbon fires and at 6% on polar solvent fires.

Click here to download Technical Sheet.

Request a Quote

Ready to Work Together?

Contact Us

We'd love to hear from you!

If you have any questions, comments, or suggestions, please get in touch with us using the form below. Our team will strive to respond as soon as possible.

Fill out the form with your information:

  • Name
  • Email
  • Subject
  • Message
Rolar para cima